A bed that feels how we sleep.

Seventy load cells under the mattress measure where the weight is, ten times a second. The bed works out who is lying where, how they lie and when they move. Wristbands and room sensors add heart rate, temperature and air quality.

Live from the bed

This is the bed right now, seen from above with the head end at the top. Darker means more pressure.

Connecting…
Head end
The bed isn't sending data right now.
Check back later.
Bed
–

Positions are estimates. The sleepers are shown as A and B, and no weights are shown.

The build in numbers

70

bed posts, each standing on its own 50 kg load cell, 20 cm apart

10×/s

pressure map refresh, recorded around the clock and kept for replays

78 %

agreement with a sleep-lab expert for our wristband sleep stages (experts agree 87 % with each other)

How it works

Load cells in every post

The frame is 10 rows of 7 posts joined by X-braces. Each post rests on a load cell with its own amplifier (HX711).

Five microcontrollers in a ring

Five Raspberry Pi Picos read 14 cells each and pass their readings around a serial ring.

A Raspberry Pi does the rest

It zeroes and filters the readings, records every hour, splits the weight between the two sleepers and estimates their position.

Wristbands and room sensors

Empatica wristbands add heart rate and movement for sleep stages. Light, temperature, humidity and CO₂ sensors record the bedroom.

What this page shows, and what it doesn't

The live feed goes through a read-only filter before it reaches the internet. The bed's own system is never exposed.

Shown

  • Relative pressure map
  • Estimated positions (A / B)
  • Room temperature, humidity, CO₂

Never shown

  • Names or body weights
  • Recordings, heart rate, questionnaires
  • Light level or controls